vishay gsot03 to gsot36 document number 85807 rev. 2, 02-jun-03 vishay semiconductors www.vishay.com 1 18078 12 3 esd protection diode features ? transient protection for data lines as per iec 61000-4-2 (esd) 15 kv (air) 8 kv (contact) iec 61000-4-5 (lightning) see i ppm below mechanical data case: sot-23 plastic package molding compound flammability rating: ul 94 v-0 terminals: high temperature soldering guaranteed: 260 c/10 sec. at terminals weight: 8 mg absolute maximum ratings ratings at 25 c, ambient temperature unless otherwise specified 1) non-repetitive current pulse and derated above t a = 25 c, for gsot03, gsot04, the peak power dissipation is 270 w thermal characteristics ratings at 25 c, ambient temperature unless otherwise specified electrical characteristics 1) 8/20 s waveform used (see figure 2) parameter te s t c o n d i t i o n symbol value unit peak power dissipation 1) 8/20 s pulse p pk 300 w forward surge current 8.3 ms single half sine-wave i fsm 7 a parameter tes t co nd iti on symbol value unit operation and storage temperature range t stg , t j - 55 to + 150 c part number device marking code rated stand-off voltage minimum breakdown voltage maximum clamping voltage maximum pulse peak current maximum leakage current maximum capacitance v wm v br v c t p = 8/20 s i d c v v v i ppm a pf @ 1 ma @ i p = 1 a 1) @ i p = 5 a 1) a @ v wm @ 0 v, 1 mhz gsot03 03 3.3 4.0 6.5 7.5 18 125 800 gsot04 04 4.0 5.0 8.5 10.5 17 125 800 gsot05 05 5.0 6.0 9.8 12.5 17 100 550 gsot08 08 8.0 8.5 13.4 15.0 15 10 400 gsot12 12 12.0 13.3 19.0 28.0 12 2 185 gsot15 15 15.0 16.7 24.0 35.0 10 1 140 GSOT24 24 24.0 26.7 43.0 60.0 5 1 83 gsot36 36 36.0 40 60.0 75.0 2 1 80
www.vishay.com 2 document number 85807 rev. 2, 02-jun-03 vishay gsot03 to gsot36 vishay semiconductors typical characteristics (t amb = 25 c unless otherwise specified) figure 1. non -repetitive peak pulse power vs. pulse time figure 2. pulse waveform figure 3. power derating p ppm - peak pulse power (w) 100 1000 10000 0.1 1.0 10 td - pulse duration ( s) 100 1000 10000 10 300w, 8/20 s waveshape 17476 0 50 100 90 80 70 60 40 30 20 10 110 i ppm - peak pulse current, % i rsm pulse width (td) is defined as the point where the peak current decays to 50% of i ppm 0 10 5 15 20 30 25 t - time ( s) t d = i pp 2 17477 t l - lead temperature c 0 20 40 60 80 100 % of rated power 0 50 25 75 100 125 150 average power peak pulse power 8/20 s 17478
vishay gsot03 to gsot36 document number 85807 rev. 2, 02-jun-03 vishay semiconductors www.vishay.com 3 package dimensions in inches (mm) .016 ( 0.4) .056 ( 1.43 ) .037( 0.95) .037( 0.95) ma x. .004 ( 0.1) .12 2 ( 3.1) .016 ( 0.4) .016 ( 0.4) 1 2 3 .102 ( 2.6) .007 ( 0.17 5) .045 ( 1.15) .110 (2.8) .052 ( 1.33 ) .005 ( 0.125) .094 ( 2.4) .037 ( 0.95) top view 17418
www.vishay.com 4 document number 85807 rev. 2, 02-jun-03 vishay gsot03 to gsot36 vishay semiconductors ozone depleting substances policy statement it is the policy of vishay semiconductor gmbh to 1. meet all present and future national and international statutory requirements. 2. regularly and continuously improve the performance of our products, processes, distribution and operatingsystems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. it is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (odss). the montreal protocol (1987) and its london amendments (1990) intend to severely restrict the use of odss and forbid their use within the next ten years. various national and international initiatives are pressing for an earlier ban on these substances. vishay semiconductor gmbh has been able to use its policy of continuous improvements to eliminate the use of odss listed in the following documents. 1. annex a, b and list of transitional substances of the montreal protocol and the london amendments respectively 2. class i and ii ozone depleting substances in the clean air act amendments of 1990 by the environmental protection agency (epa) in the usa 3. council decision 88/540/eec and 91/690/eec annex a, b and c (transitional substances) respectively. vishay semiconductor gmbh can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. we reserve the right to make changes to improve technical design and may do so without further notice. parameters can vary in different applications. all operating parameters must be validated for each customer application by the customer. should the buyer use vishay semiconductors products for any unintended or unauthorized application, the buyer shall indemnify vishay semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. vishay semiconductor gmbh, p.o.b. 3535, d-74025 heilbronn, germany telephone: 49 (0)7131 67 2831, fax number: 49 (0)7131 67 2423
|
